Kia Optima: Hydraulic System

Installation

1. Installation is the reverse of removal. If the oil seal on the transaxle case side is damaged and fluid is leakin ...

Description and Operation

Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filt ...

See also:

Intercooler. Repair procedures
Removal and Installation 1. Disconnect the battery terminals. (Refer to Engine and transaxle assembly in this group) 2. Remove the air cleaner assembly and the int ...

Installation
Installation is the reverse of removal. Canister installation bolt:3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) ...

Recommended Shifting
Drive the vehicle in the highest gear that allows the engine to run and accelerate smoothly without hesitating or stalling. This will give you the most efficient fuel economy and emission control. ...