Kia Optima: Oil Pump. Description and Operation
Description
The oil pump is built-in as a single unit with the 26 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.
Components and Components Location
Components Location
1. Automatic transaxle
2. Valve body assembly
3. Oil pump assembly
...
Oil Pump. Components and Components Location
Components
1. Reaction shaft support assembly
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-Housing
7. Reaction shaft
8. Bushin ...
See also:
Muffler > Repair procedures
Removal and Installation
1.
Remove the front muffler (B)
after disconnecting the oxygen sensor connector (A).
Tightening torque:39.2
~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...
HAC (Hill-start assist control)
Hill start Assist Control is a comfort function. The main intend is to prevent
the vehicle from rolling backwards while driving off uphill on an inclined surface.
HAC holds the braking pressure bu ...
Transaxle Oil Temperature Sensor. Schematic Diagrams
Circuit Diagram
...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2026