Kia Optima: Fluid. Repair procedures - Hydraulic System - Automatic Transaxle System - Kia Optima TF 2011-2023 Service ManualKia Optima: Fluid. Repair procedures

Fluid. Components and Components Location
Components Location 1. Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, perfo ...

See also:

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pre ...

SS-A Solenoid Valve(ON/OFF). Specifications
Specifications ON/OFF Solenoid Valve(SS-A, SS-B)▷ Control type : Normal low type Control pressure kpa(kgf/cm², psi) 490.33(5.0, 71.12)  Internal ...

To fasten the front lap/shoulder belt
1. Grasp the buckle and tongue plate. 2. Slowly pull the lap/shoulder belt out from the retractor. 3. Insert the tongue plate into the open end of the buckle until an audible “click” is heard, ...

Copyright © www.kiopman.com 2023