Kia Optima: Air Conditioning System
- General Safety Information and Caution
- Description and Operation
- Repair procedures
- Components and Components Location
- Compressor Oil. Repair procedures
- Refrigerant line. Components and Components Location
- Refrigerant line. Repair procedures
- Compressor. Components and Components Location
- Compressor. Repair procedures
- Condenser. Components and Components Location
- Condenser. Repair procedures
- Receiver-Drier. Repair procedures
- A/C Pressure Transducer. Components and Components Location
- A/C Pressure Transducer. Description and Operation
- A/C Pressure Transducer. Repair procedures
- Evaporator Temperature Sensor. Description and Operation
- Evaporator Temperature Sensor. Repair procedures
- Photo Sensor. Description and Operation
- Photo Sensor. Repair procedures
- Ambient Sensor. Description and Operation
- Ambient Sensor. Repair procedures
- Cluster ionizer. Components and Components Location
- Cluster ionizer. Description and Operation
- Cluster ionizer. Repair procedures
- Heater Unit. Components and Components Location
- Heater Unit. Repair procedures
Special Service Tools
Special Service Tools
Tool (Number and name)
Illustration
Use
09977-3R000
Disc & hub assembly bolt remover
Removal ...
General Safety Information and Caution
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is
highly volatile. A drop on the skin of your hand could result in localized
frostbite. When handling the refrige ...
See also:
Why didn’t my air bag go off in a collision? (Inflation and non-inflation conditions
of the air bag)
There are many types of accidents in which the air bag would not be expected
to provide additional protection.
These include rear impacts, second or third collisions in multiple impact accidents,
...
Removing and storing the spare
tire
Turn the tire hold-down wing bolt
counterclockwise.
Store the tire in the reverse order of
removal.
To prevent the spare tire and tools
from “rattling” while the vehicle is in
motion, st ...
Removal
1.
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to the Body group- Fron ...