Kia Optima: A/C Pressure Transducer. Repair procedures - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Optima TF 2011-2020 Service ManualKia Optima: A/C Pressure Transducer. Repair procedures

A/C Pressure Transducer. Description and Operation
Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operating ...

Inspection
1. Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals. 2. Inspect the voltage value whether it is sufficie ...

See also:

TCS ON/OFF MODE
In the TCS ON mode, the indicator in the instrument cluster will not be illuminated. The indicator will illuminate when the ignition key is turned to the УONФ position, but should go off after 3 se ...

Intercooler. Repair procedures
Removal and Installation 1. Disconnect the battery terminals. (Refer to Engine and transaxle assembly in this group) 2. Remove the air cleaner assembly and the int ...

Mode Control Actuator. Description and Operation
Description The mode control actuator is located at the heater unit.It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select s ...

Copyright © www.kiopman.com 2020