Kia Optima: A/C Pressure Transducer. Description and Operation
Description
A/C pressure transducer convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operating it high speed or low speed. Engine ECU stop the operation of compressor when the temperature of refrigerant line is so high or so low irregularly to optimize air conditioning system.
A/C Pressure Transducer. Components and Components Location
Component Location
...
See also:
Components and Components Location
Components Location
1. Drive shaft
2. Lower arm
3. Front disk
4. Front strut assembly
5. Steering gearbox
6. Front stabilizer bar
7. Sub frame
...
Function
Wiper Control
Washer Control Coupled With Wiper
1.
Under IGN2 = ON, wiper LOW relay
is turned ON after T2 from Washer switch ON if washer switch is ON for T1
and wipe ...
Yaw-rate and Lateral G Sensor. Description and Operation
Description
When the vehicle is turning with respect to a vertical axis the yaw rate sensor
detects the yaw rate electronically by the vibration change of plate fork inside
the yaw rate sensor.If ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2026