Kia Optima: Condenser. Components and Components Location

Disassembly

1. Disconnect the negative (-) battery terminal. 2. Remove the front tire (A) from hub assembly. Tightening torque : 10~15N.m (9~11kgf.m, 7.37~11lbf.ft ...

Condenser. Repair procedures

...

See also:

The Other Fuses And Relays Component. Repair procedures
Inspection Power Relay Test (Type B)Check for continuity between the terminals. A : Two turn unlock relay 1. There should be continuity between the No.30 and No.87 terminals when power ...

Removal
1. Turn the ignition switch OFF. 2. Remove the air duct (B) and air cleaner assembly (A). 3. Remove the ECM connector (B) and the arrange the ...

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.The SAS is used to determine turning di ...