Air bag inflation conditions
Front air bags
Front air bags are designed to inflate in a frontal collision depending on the
intensity, speed or angles of impact of the front collision.
Side air bags
Side air bags (side ...
Inspection
1.
Check the bushing for wear and
deterioration.
2.
Check for all bolts and nut.
...
Receiver-Drier. Repair procedures
Replacement
1.
Remove the condenser, and then
remove the bottom cap (B) with L wrench (A) from the condenser.
Tightening torque :20~25N.m
(2.0~2.5kgf.m, 14.5~18.2lb-ft) ...