Kia Optima: Electric WGT Control Actuator. Description and Operation
Desrcription
The Electric WGT Control Actuator is installed on the turbocharger.It operates the vain in the Waste Gate Turbocharger (WGT) and regulates the compressed air amount by the ECM's PWM signal. This actuator consists of a DC motor which actuates the vane, a 2-step gear which increases torque of the DC motor, a position sensor which detects status of the vane, an electric control unit which drives the DC motor.
Installation
Refer to "High Pressure Fuel Pump" in this group.
...
Electric WGT Control Actuator. Components and Components Location
Components
1 . Housing
2 . Cover
3. Sealing Cover
4 . Motor
5. Pinion
6 . Shaft Gear
7 . PCB Assembly
8 . Middle Gear
9 . Lever
10 . Lever Pin
11 ...
See also:
Power Door Lock Actuators Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to the BD group - "Front door")
2.
Remove the front door module.
3.
Disconnect the 7P connector from ...
Removal
1.
Remove the front wheel & tire.
Tightening torque:88.3
~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the hose eyebolt ( ...
Repair procedures
High Voltage Shutoff Procedure
Shut off the high voltage circuit before doing any work
related with the high voltage system (Battery Pack Assembly, Power Relay
As ...