Kia Optima: Fuses And Relays

Fuel Filler Door Open Switch. Repair procedures

Inspection 1. Remove the driver door trim. (Refer to the BD group - "Front door") 2. Remove the switch assembly connector (A) from the door trim. ...

Components and Components Location

Component Location 1. Deicer relay 2. Not used 3. HAC relay 4. Rain sensor relay 5. Blower relay 6. B/Horn relay 7. Wiper relay 8. Not used 9. Not use ...

See also:

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pre ...

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the lens trunk trim. (Refer to the BD group - "Trunk") 3. Replace the bulb (A) ...

Electric WGT Control Actuator. Specifications
Specification [EWGA Position Sensor] Position Output  Voltage[V] Operating Angle[°] Range of Rod [mm], reference Mechanical Close end ...