To defrost outside windshield
1. Set the mode selection switch to the
position.
When you select position, the system
automatically turns on the outside (fresh) air mode.
2. Set the temperature control knob to the extreme ...
Inspection
1.
Measure the pressure of high
pressure line by measuring voltage output between NO.1 and NO.2 terminals.
2.
Inspect the voltage value whether
it is sufficie ...
To Resume the Preset Speed
The vehicle will automatically resume the speed set prior to cancellation when
you press and release the RES/ACCEL switch, providing the vehicle speed is above
25 mph (40 km/h). ...