Kia Optima: Charging System

Removal and Installation

1. Disconnect the ignition coil connectors (A). 2. Remove the ignition coils (A). Tightening torque :3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2. ...

Description and Operation

Description The charging system includes a battery, an alternator with a built-in regulator, and the charging indicator light and wire.The Alternator has built-in diodes, each rectifying AC curren ...

See also:

Replacement (Without EPB)
Rear brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque:21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft) ...

Input Speed Sensor. Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speedFig 2) Input/Output speed sensor at high speed ...

Components (2)
1. Vacuum pump 2. Bracket ...