Kia Optima: Removal and Installation - Repair 
		procedures - Ignition System - Engine Electrical System - Kia Optima TF 2011-2023 Service ManualKia Optima: Removal and Installation

1. Disconnect the ignition coil connectors (A).

2. Remove the ignition coils (A).

Tightening torque :

3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)


3. Installation is the reverse of removal.

Repair procedures
On-vehicle Inspection Spark Test 1. Disconnect the ignition coil connectors (A). 2. Remove the ignition coils (A). ...

Charging System
...

See also:

Installation
Be sure to install the harness wires so they will not pinch or interfere with other parts. 1. Remove the ignition key ...

Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perf ...

Flashing Headlights
To flash the headlights, pull the lever toward you. It will return to the normal position when released. The headlight switch does not need to be on to use this flashing feature. ...

Copyright © www.kiopman.com 2023