Kia Optima: Engine control system

Maintenance schedule

...

Chassis and body

Chart symbols: I- Inspect these items and their related parts. If necessary, correct, clean, refill, adjust or replace. R- Replace or change L- Lubricate. (1) Refer to the lubricant a ...

See also:

Inspection
1. Check the strut bearing for wear and damage. 2. Check the spring upper and lower seat for damage and deterioration. 3. Compress and extend the pist ...

Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's i ...

Using USB device
CAUTION IN USING USB DEVICE To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. If you start the engine w ...