Kia Optima: Side Airbag (SAB) Module. Description and Operation - Airbag Module - Restraint - Kia Optima TF 2011-2023 Service ManualKia Optima: Side Airbag (SAB) Module. Description and Operation

Description

The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least three minutes before beginning work. ...

Side Airbag (SAB) Module. Components and Components Location
Components ...

See also:

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws then connect the pressure side impact sensor connector. Tightening t ...

Recirculated Air position
When the air intake control switch is depressed (switch indicator illuminates), almost all outside air flow into the vehicle is shut off and air inside the vehicle is recirculated. This position ...

Installation
• Install the component with the specified torques. • Note that internal damag ...

Copyright © www.kiopman.com 2023