Kia Optima: Installation

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). 3. Remove the reinforce panel after loosening th ...

Seat Electrical

...

See also:

Removal
1. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line� in this group). 2. Remove the fuel pump service cover (A) in ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to " ...

Output Speed Sensor. Specifications
Specifications ▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40~150)) -40~302 Air gap(mm)in. (0.55~1) 0.0217~0.0394 ...