Kia Optima: Blower
- Blower Unit. Components and Components Location
- Blower Unit. Repair procedures
- Blower Motor. Repair procedures
- Power Mosfet. Repair procedures
- Blower Resistor. Repair procedures
- Climate Control Air Filter. Description and Operation
- Climate Control Air Filter. Repair procedures
- Intake Actuator. Components and Components Location
- Intake Actuator. Description and Operation
- Intake Actuator. Repair procedures
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Using the screwdriver, remove
the side cover (A).
3.
Loosen the mounting screw and
the ...
See also:
Inspection
Measuring Resistance
1.
Disconnect the cruise control switch connector from
the control switch.
2.
Measure resistance between terminals on the con ...
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are
as follows:
1.
Connect self-diagnosis connector(16pins)
located in the lower of driver side crash pad to ...
Ambient Sensor. Description and Operation
Description
1.
The ambient temperature sensor
is located at the front of the condenser and detects ambient air temperature.
It is a negative type thermistor; resistance will increas ...
Copyright © www.kiopman.com 2021