Kia Optima: Intake Actuator. Repair procedures - Blower - Heating,Ventilation, Air Conditioning - Kia Optima TF 2011-2020 Service ManualKia Optima: Intake Actuator. Repair procedures

Intake Actuator. Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake ...

Inspection
1. Ignition "OFF". 2. Disconnect the intake actuator connector. 3. Verify that the actuator operates to the recirculation position when conn ...

See also:

Limp home (override) procedure
When you turn the ignition switch to the ON position, if the immobilizer indicator () goes off after blinking 5 times, your transponder equipped in the ignition key is out of order. You cannot sta ...

Changing the Manual Transaxle Oil
1. Raise and suitably support the vehicle. 2. Remove the drain plug on the bottom of the transaxle. 3. After the oil has drained completely, install a new washer on the plug, reinstall the drain p ...

Air Ventilation Seat. Description and Operation
Description Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats.It inhales the indoor air through the blower installed at the seat cush ...

Copyright © www.kiopman.com 2020