Kia Optima: Rearview camera
The rearview camera will activate when the back-up light is ON with the ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehicle through the AV monitor while backing-up.
WARNING
- This system is a supplementary function only. It is the responsibility of the driver to always check the inside/outside rearview mirror and the area behind the vehicle before and while backing up because there is a dead zone that can't be seen through the camera.
- Always keep the camera lens clean. If the lens is covered with foreign matter, the camera may not operate normally.
✽ NOTICE
The rearview camera may not operate normally, when you drive in the extremely high or low temperature area.
(operating temperature: -20°C~65°C (-13°F ~ 149°F))
Self-diagnosis
If you don’t hear an audible warning sound or if the buzzer sounds intermittently
when shifting the gear to the R (Reverse) position, this may indicate a malfunction
in the rear parking assist sys ...
Welcome system
...
See also:
Fuel Tank Pressure Sensor (FTPS). Specifications
Specification
Pressure
[kPa (kgf/cm², in H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
...
Output Speed Sensor. Description and Operation
Description
The output speed sensor is a vital unit that measures the rate of rotation of the
transaxle's turbine shaft and output shaft, and delivers the readings to the TCM.
The sensor prov ...
To set cruise control speed
1. Press the CRUISE ON-OFF button on the steering wheel to turn the system on.
The CRUISE indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which must ...