Description
1. | The intake actuator is located at the blower unit. |
2. | It regulates the intake door by signal from control unit. |
3. | Pressing the intake selection switch will shift between recirculation and fresh air modes. |
Hood Repair procedures
Replacement
Hood Assembly Replacement
•
When removing and installing the hood, an assistant is necessary.
•
Be careful not to damage the hood and ...
Repair procedures
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cover the front sensor to stop functioning.
3.
Sh ...
Hazard Warning Flasher
The hazard warning flasher causes the rear tail lights and front turn signal
lights to flash on and off, which serves as a warning to other drivers to exercise
caution when approaching or passin ...