Replacement
1. | Disconnect the damper (B) from
the glove box (A).Remove the glove box lift (C).
|
2. | Remove the filter cover with
pushing the knob.
|
3. | Replace the air filter (B), install
it after making sure of the direction of air filter.
|
4. | Installation is the reverse order of removal. |
To Reset at a Faster Speed
1. Push the RES/ACCEL switch and hold it.
2. Accelerate to desired speed and release the RES/ACCEL switch. While the switch
is pressed, the vehicle will gradually gain speed. ...
Tire Care
For proper maintenance, safety, and maximum fuel economy, you must always maintain
recommended tire inflation pressures and stay within the load limits and weight
distribution recommended for your ...
Output Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
•
...