Jump Starting Procedure
1. Make sure the booster battery is 12-volt and that its negative terminal is
grounded.
2. If the booster battery is in another vehicle, do not allow the vehicles to
touch.
3. Turn off all unnec ...
Inspection
Connecting Rod
1.
Check the connecting rod end
play.Using a feeler gauge, measure the end play while moving the connecting
rod back and forth.
End play :Standard : 0.10~ ...
Components - 1 [ General ]
1. Headrest
2. Headrest guide
3. Rear seat back cover
4.Rear seat back frame assembly
5. Rear back armrest board
6. Rear seat cushion cover
7. Rear back armres ...