Kia Optima: Rear Disc Brake. Components and Components Location

Installation

1. Installation is the reverse of removal. 2. Use a SST (09581-11000) when installing the brake caliper assembly. 3. After installation, bleed ...

Components(Without EPB)

1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

See also:

Air Ventilation Seat. Description and Operation
Description Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats.It inhales the indoor air through the blower installed at the seat cush ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. ...

Installation
1. Installation is the reverse of removal. 2. Perform the “Assembly check� with GDS. 3. Check that the brake operates normally by pushing the ...