Kia Optima: Specifications - Specifications - General Information - Body (Interior and Exterior) - Kia Optima TF 2011-2024 Service ManualKia Optima: Specifications

Items
Specification
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Rear Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Trunk Lid
Type
Torsior bar type
Seat Belts
Front
3 point type with Emergency Locking Retractor (E.L.R)
Rear
3 point type with Emergency Locking Retractor (E.L.R)


Specifications
...

Tightening Torque
Items N.m Kgf.m lb-ft Front and rear doors Door hinge to body 34.3 ~ 41.2 3.5 ~ 4.2 25.3 ~ 30.4 ...

See also:

Inspection (With GDS)
1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. 2. If diagnosis is ...

Input Speed Sensor. Description and Operation
Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input ...

Engine compartment
2.4L Engine 2.0L Engine 1. Engine coolant reservoir 2. Engine oil filler cap 3. Brake/clutch* fluid reservoir 4. Air cleaner 5. Fuse box 6. Positive battery terminal 7. Negative battery term ...

Copyright © www.kiopman.com 2024