Kia Optima: Installation
| 1. | Install the head lamp leveling unit. |
| 2. | Reconnect the head lamp leveling unit connector. |
Removal
1.
Remove the head lamp leveling
unit connector (A).
2.
Loosen the mounting bolts (3EA)
of automatic head lamp leveling unit assembly.
Tighting torq ...
See also:
Measurement Point
Measurements should be taken at the center of the hole.
...
Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to
the Diagnostic Trou ...
Remove
1.
Turn ignition OFF and disconnect
the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body – “Crash pad”)
3.
Disconnec ...
Copyright © www.kiopman.com 2022