Kia Optima: Removal - Auto Head Lamp Leveling Unit. Repair procedures - Auto Head Lamp Leveling Device - Body Electrical System - Kia Optima TF 2011-2023 Service ManualKia Optima: Removal

1. Remove the head lamp leveling unit connector (A).

2. Loosen the mounting bolts (3EA) of automatic head lamp leveling unit assembly.

Tighting torque :

6.86±1.96 Nm (0.7±0.2 kgf.m, 5.06±1.44 lbf.ft)


3. Remove the head lamp leveling unit assembly.

Inspection
1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check for operation. If the aim of the head lamps changes smoothly when the head lamp leve ...

Installation
1. Install the head lamp leveling unit. 2. Reconnect the head lamp leveling unit connector. ...

See also:

Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group) 3. Remove the steering wheel. (Refe ...

Tilting the sunroof
When the sunshade is closed If you push the sunroof control lever upward, the sunshade will slide all the way open then the sunroof glass will tilt. To stop the sunroof movement at any point, p ...

Copyright © www.kiopman.com 2023