Kia Optima: Cylinder Head. Components and Components Location
|
1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly |
7. Exhaust camshaft upper bearing 8. Exhaust camshaft lower bearing 9. MLA 10. Retainer lock 11. Retainer 12. Valve spring |
13. Valve stem seal 14. Valve 15. Cylinder head 16. Cylinder head gasket 17. Fuel pump bracket |
Reassembly
1.
Reassemble the CVVT assembly
(A) and camshaft (B).
Tightening torque :53.9
~ 63.7N.m (5.5 ~ 6.5kgf.m, 39.7 ~ 47.0lb-ft)
...
See also:
Engine temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated engine. If your vehicle overheats,
refer to “If the engine over ...
Removing and storing the spare
tire
Turn the tire hold-down wing bolt
counterclockwise.
Store the tire in the reverse order of
removal.
To prevent the spare tire and tools
from “rattling” while the vehicle is in
motion, st ...
Rear Seat. Repair procedures
Replacement
Seat Assembly Replacement
1.
Remove the rear seat cushion
(A).
2.
Disconnect the rear seat heater
connectors (A).
3.
After ...
Copyright © www.kiopman.com 2024