Kia Optima: Compass Mirror. Description and Operation
Function
| 1. | Push the A button lower of the rear view mirror to turn on the function of the compass mirror so that displays a sign of a direction on the small board in the upper-right side of the mirror. |
| 2. | Push the A button again to turn off its function. |
Installation
1.
Install the mirror assembly.
2.
Install the mirror wiring cover
and connector.
...
Compass Mirror. Repair procedures
Calibration Procedure
If the compass has been calibrated or set to variance zone number incorrectly, or
you are driving in specific places (tunnel, parking lot in building, underground
parking lo ...
See also:
Trailing Arm. Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Trouble Diagnostics When Using GDS
1.
The body control module can diagnose
by using the GDS more quickly.The BCM communicates with the GDS and then
reads the input/output value and drives the actuator.
...
Driver position memory system
A driver position memory system is provided to store and recall the driver seat
position with a simple button operation. By saving the desired position into the
system memory, different drivers ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2025 Owners Manual
- Kia Optima DL3 2019-2025 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2025 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2025