Kia Optima: Bumper

Installation

1. With a knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire rear window glass opening flange : A. D ...

Front Bumper. Components and Components Location

...

See also:

Seat Heater Switch. Schematic Diagrams
Circuit Diagram ...

Inspection
[Motor] 1. Turn ignition switch OFF. 2. Disconnect the EWGA connector. 3. Check that the EWGA is stuck by foreign material. ...

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, perfo ...