Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and
2.
4.
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OTS connector.
3.
Remove the OTS.
4.
After immersing the thermistor of the ...
Rear Door. Components and Components Location
Components
1. Rear door trim
2. Rear door belt inside weatherstrip
3. Rear door trim seal
4. Rear door module
5. Rear door panel
6. Rear door side molding
7. Rear do ...