Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the connector (A), and then remove the
sensor (B).
...
Limp Home Function
1.
Limp Home By TesterIf the
PCM(ECM) detects the fault of the SMARTRA or transponder, the PCM(ECM) will
allow limp home function of the immobilizer. Limp home is only possible
i ...
Air Quality Control System
The air inflow from the outside vehicle can be automatically controlled.
Press the () button to activate the
“Air Quality Control System”. To deactivate the system, press the ()
button or air int ...