Kia Optima: Purge Control Solenoid Valve (PCSV). Repair procedures

Purge Control Solenoid Valve (PCSV). Schematic Diagrams

Circuit Diagram ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. ...

See also:

Installation
1. Remove ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least three minutes. 3. Install the ancho ...

Precautions
✽ NOTICE The transmitter (or smart key) will not work if any of following occurs: The ignition key is in the ignition switch. You exceed the operating distance limit (about 30 m [90 feet ...

Components and Components Location
Component Location 1. Deicer relay 2. Not used 3. HAC relay 4. Rain sensor relay 5. Blower relay 6. B/Horn relay 7. Wiper relay 8. Not used 9. Not use ...