Kia Optima: Installation

Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the lens trunk trim. (Refer to the BD group - "Trunk") 3. Replace the bulb (A) ...

Hazard Lamp Switch. Repair procedures

...

See also:

Installation
Refer to "Accelerator Pedal" in this group. ...

Automatic Heating and Cooling Control System
Your vehicle is equipped with an automatic heating and cooling control system controlled by simply setting the desired temperature. ...

Jump Starting Procedure
1. Make sure the booster battery is 12-volt and that its negative terminal is grounded. 2. If the booster battery is in another vehicle, do not allow the vehicles to touch. 3. Turn off all unnec ...