Kia Optima: Automatic Heating and Cooling Control System

System Operation

Ventilation 1. Set the mode selection switch to the position. 2. Set the air intake control switch to the outside air position. 3. Set the temperature control knob to the desired position. 4. Se ...

Automatic Operation

The FATC (Full Automatic Temperature Control) system automatically controls the heating and cooling by doing as follows: 1. Push the "AUTO" switch. The indicator light will come on confir ...

See also:

Inspection
Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input s ...

Power Out Side Mirror Switch. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") 3. ...

Removal
• DON’T remove the camshaft position sensor while the engine is running or right after engine is turned ...