Kia Optima: Recirculated Air position - Automatic Heating and Cooling Control System - Driving Your Vehicle - Kia Optima MS/Magentis 2000-2005 Owners ManualKia Optima: Recirculated Air position

When the air intake control switch is depressed (switch indicator illuminates), almost all outside air flow into the vehicle is shut off and air inside the vehicle is recirculated.

This position can be used temporarily for maximum heating or cooling (if equipped with air conditioning) and to help prevent undesirable outside air flow into the vehicle.

Outside (Fresh) Air Position

When the air intake control switch is not illuminated air enters the ventilation system from outside the vehicle. Use this position for normal ventilation and heating.

Automatic Operation
The FATC (Full Automatic Temperature Control) system automatically controls the heating and cooling by doing as follows: 1. Push the "AUTO" switch. The indicator light will come on confir ...

Heating and Cooling System Off
Press the "OFF" button to stop the operation of the heating and cooling system. ...

See also:

Components and Components Location
Component Location 1. Driver power window main switch 2. Passenger power window switch 3. Front window motor 4. Rear window motor 5. Rear window switch ...

Folding the rear seat
The rear seatbacks may be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle. WARNING The purpose of the fold-down rear seatbacks is to allow you to carry ...

Receiver-Drier. Repair procedures
Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque :20~25N.m (2.0~2.5kgf.m, 14.5~18.2lb-ft) ...

Copyright www.kiopman.com 2026