Kia Optima: Inspection
| 1. |
Turn the ignition switch OFF. |
| 2. |
Disconnect the injector connector. |
| 3. |
Measure resistance between the injector terminals
1 and 2. |
| 4. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
In case of removing the high pressure fuel pump,
high pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by ...
See also:
Removal
1.
Remove the steering column upper
and lower shrouds after removing 3 screws.
2.
Remove the wiper switch (A) by
releasing the part.
3.
If nec ...
Description
and Operation
Description
Ignition timing is controlled by the electronic control ignition
timing system. The standard reference ignition timing data for the engine operating
conditions are preprogrammed in ...
Anchor Pretensioner (APT). Description and Operation
Description
Front seat belt anchor pretensioner operates as well as belt pretensioner at the
same time If it gets into its deploy condition after a collision. It is located
at near anchor on fron ...