Kia Optima: Injector. Repair procedures

Injector. Schematic Diagrams

Circuit Diagram ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. ...

See also:

Inspection
1. Ignition "OFF� 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode w ...

Inspection
1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. Valve opening temperature: 82 ± 1.5°C ( ...

Installation
1. Make sure of the length of compressor mounting bolts, and then tighten it A→B→C→D order. Tightening torque :20.0~32.9N.m (2.04~3.36kgf.m, 14.7~24 ...