Kia Optima: Canister. Repair procedures - Evaporative Emission Control 
		System - Emission Control System - Kia Optima TF 2011-2019 Service ManualKia Optima: Canister. Repair procedures

Repair procedures
Inspection [System Inspection] 1. Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body. 2. Chec ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the ventilation hose (A) from the fuel tank air filter. ...

See also:

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to " ...

Starter Relay. Repair procedures
Inspection 1. Remove the fuse box cover. 2. Remove the starter relay (A). 3. Using an ohmmeter, check that there is continuit ...

Suspension System. Tires/Wheels. Wheel. Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Copyright © www.kiopman.com 2019