Kia Optima: Inspection
| 1. |
Check for the following items visually.
B: Canister ↔ Fuel Tank C: Canister ↔ Intake Manifold
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the ventilation hose (A) from the fuel
tank air filter. ...
Installation
Installation is the reverse of removal.
Canister installation bolt:3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
...
See also:
Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch
input (LIN communication) is ON then both wiper low relay and wiper high
relay outputs are controlled by the rain sensor input s ...
Schematic Diagrams
System Block Diagram
Component Parts And Function Outline
Component part
Function
Vehicle speed sensor
Converts vehicle speed to pulse.
...
Intake Air Temperature Sensor (IATS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and
4.
...
Copyright © www.kiopman.com 2019