Kia Optima: Suspension System. Tires/Wheels. Alignment. Repair procedures

Suspension System. Tires/Wheels. Wheel. Repair procedures

Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Front wheel alignment

When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always position the ...

See also:

Checking the Automatic Transaxle Fluid Level
The automatic transaxle fluid level should be checked regularly. The volume of the transaxle fluid changes with temperature. Although it is best to check the level after having driven the vehicle ...

Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58k ...

Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash ...