Kia Optima: Starter. Repair procedures

[VALEO]

1. Front bracket 2. Stop ring 3. Stopper 4. Overrun clutch assembly 5. Internal gear assembly 6. Lever 7. Lever stop 8. Magnet switch assembly 9. Driv ...

Removal and Installation

1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque :4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) ...

See also:

Child restraint anchorage position
Your vehicle is equipped with an anchor for securing the tether strap of a child restraint system (child seat). The child restraint anchor fittings are installed on the shelf behind the rear se ...

Transaxle Oil Temperature Sensor. Schematic Diagrams
Circuit Diagram ...

Changing the Manual Transaxle Oil
1. Raise and suitably support the vehicle. 2. Remove the drain plug on the bottom of the transaxle. 3. After the oil has drained completely, install a new washer on the plug, reinstall the drain p ...