Kia Optima: Starter. Components and Components Location

Repair procedures

Starter Circuit Troubleshooting The battery must be in good condition and fully charged. 1. Disconnect the fuel ...

[REMY]

1. Front bracket 2. Stop ring 3. Stopper 4. Overrun clutch assembly 5. Internal gear assembly 6. Lever 7. Lever packing 8. Magnet switch assembly 9. P ...

See also:

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. 3. Install the seat belt ...

Removal
Room Lamp 1. Disconnect the negative(-) battery terminal. 2. Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver. ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T ...