Kia Optima: SS-A Solenoid Valve(ON/OFF). Specifications - 35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation - Automatic Transaxle System - Kia Optima TF 2011-2023 Service ManualKia Optima: SS-A Solenoid Valve(ON/OFF). Specifications

Specifications

ON/OFF Solenoid Valve(SS-A, SS-B)

▷ Control type : Normal low type

Control pressure kpa(kgf/cm², psi)
490.33(5.0, 71.12)
 Internal resistance(Ω)
10~11


SS-A Solenoid Valve(ON/OFF). Description and Operation
Description SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...

SS-A Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram ...

See also:

Cruise indicator
The cruise indicator light in the instrument cluster is illuminated only when the vehicle cruising speed has been set using the control switch. The indicator light does not illuminate when the m ...

Programming
Your vehicles may require the ignition switch to be turned to the "ACC" position for programming and/or operation of HomeLink. It is also recommended that a new battery be replaced in th ...

Erasing Programmed Buttons
To erase the three HomeLink buttons, press and hold the two outside buttons until the indicator light begins to flash (after 20 seconds). Release both buttons. Individual buttons cannot be erased ...

Copyright © www.kiopman.com 2023