Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.
Inspection
1.
Check the signal waveform of the CMPS and CKPS using
the GDS.
Specification:
Refer to “Wave Form”
...
Installation
•
Be sure to check the low pressure fuel hose
quick-connector (A) is completely connected to the high pressure
...
Adjustment
Adjust Hood
1.
After loosening the hinge (A)
mounting bolt, adjust the hood (B) by moving it up or down, or right or
left.
2.
Adjust the hood height by turning
the ...