Battery replacement
When replacement is necessary, use the following procedure.
1. Using a screwdriver, loosen the screw on the backside of the transmitter then
use a thin tool to pry open the transmitter.
2. Disas ...
Line Pressure Control Solenoid Vale. Specifications
Specifications
Direct control VFS[LINE Pressure]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
...
Tripmeter (If equipped)
TRIP A : Tripmeter A
TRIP B : Tripmeter B
The tripmeter indicates the distance of individual trips selected by the driver.
Tripmeter A and B can be reset to zero by pressing the mode selection but ...