Kia Optima: SS-A Solenoid Valve(ON/OFF). Description and Operation
Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body.
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
SS-A Solenoid Valve(ON/OFF). Specifications
Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)▷ Control type : Normal low type
Control pressure kpa(kgf/cm², psi)
490.33(5.0, 71.12)
Internal ...
See also:
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad.(Refer
to BD group - "Crash Pad")
3.
Disconnect the Intake actu ...
Don't let your parking brake
freeze
Under some conditions your parking
brake can freeze in the engaged position.
This is most likely to happen when there
is an accumulation of snow or ice around
or near the rear brakes or if the ...
Inspection
1.
Measure the output voltage between
the terminal of the wheel speed sensor and the body ground.
...
Copyright © www.kiopman.com 2022