Kia Optima: Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button.
Recirculated air position

The indicator light on the button illuminates when the recirculated air position is selected.
With the recirculated air position selected, air from passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.
Outside (fresh) air position

The indicator light on the button will not illuminate when the outside (fresh) air position is selected.
With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.
✽ NOTICE
Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windshield and side windows and the air within the passenger compartment may become stale.
In addition, prolonged operation of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.
WARNING
Temperature control
Fan speed controlInput Speed Sensor. Description and Operation
Description
Input speed sensor is a vital unit that measures the rate of rotation of the input
shaft inside the transaxle and delivers the readings to the TCM. The sensor provides
critical input ...
Recommended SAE Viscosity Number
✽ NOTICE
Always be sure to clean the area around any filler plug, drain plug, or dipstick
before checking or draining any lubricant. This is especially important in dusty
or sandy areas an ...
Intake Actuator. Description and Operation
Description
1.
The intake actuator is located
at the blower unit.
2.
It regulates the intake door
by signal from control unit.
3.
Pressing the intake ...