Kia Optima: Fan speed control - Heating and air conditioning - Manual climate control system - Features of your vehicle - Kia Optima TF 2011-2026 Owners ManualKia Optima: Fan speed control

The ignition switch must be in the ON position for fan operation.

The ignition switch must be in the ON position for fan operation.

The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan speed, turn the knob to the right for higher speed or left for lower speed. Setting the fan speed control knob to the “0” position turns off the fan.

Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator li ...

Air conditioning
1.Select the mode. 2. Control the fan speed. 3. Control the air conditioning knob. However, selected, the outside air position is not operated. ...

See also:

Climate control seat (if equipped)
The climate control seat is provided to cool or warm the seat during hot or cold weather by blowing air through small vent holes on the surface of the seat and seatback. While the engine is runn ...

Driving in Flooded Areas
Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perf ...

Inspection
1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. 2. To diagnose the SJB functi ...

Copyright www.kiopman.com 2026