Kia Optima: Side Body. Body Repair

Front Body C

Engine mounting bracket hole (Ø11) Transaxle mounting hole (Ø13) Engine mounting bracke ...

Side Body A

Front side member tooling hole (Ø20) Fender apron tooling hole (Ø10) Front door upper h ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the OTS connector. 3. Remove the OTS. 4. After immersing the thermistor of the ...

Inspection
1. Ignition "ON" 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise volta ...

Inspection
Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and ...