Kia Optima: Removal
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the front wheel guard
clip(2EA). (Refer to the BD group - "Front bumper") |
| 3. | Disconnect the front fog lamp
connector (A).
|
| 4. | Replace the front fog bulb (A)
turning it in the counter clock-wise direction.
|
Inspection
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the lighting switch of
the multi-function switch. (Refer to the multi-function switch)
3.
Wi ...
Installation
1.
Install the front fog bulb.
2.
Reconnect the lamp connector.
3.
Install the front bumper.
...
See also:
Rear Bumper. Repair procedures
Replacement
•
Use a plastic panel removal
tool to remove interior trim pieces to protect from marring the
s ...
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance with
the ECM control signal which is calculated by the engine sp ...
Inspection
1.
Check signal waveform of Input
& output speed sensor using the GDS.
Specification: Refer to "Signal
Wave Form" section.
...
Copyright © www.kiopman.com 2023